Setting Up the Infrastructure Mode | Toshiba GN-1060 specification

1 SETTING UP WIRELESS NETWORK

8

9

Press [INFRASTRUCTURE] and press [NEXT].

The SSID SETTINGS screen displayed.

Continue to the procedure for specifying the SSID. P.16 “Specify SSID”

Setting Up the Infrastructure Mode 15

Image 17

Toshiba GN-1060 manual Setting Up the Infrastructure Mode

Contents

Operators Manual for Wireless LAN Module Page Preface „ How to read this manual ‰ Symbols in this manual‰ Model and series names in this manual ‰ Options ‰ Trademarks „ Precautions for Use Precautions„ About Toshiba Wireless Solution ‰ Wireless Interoperability ‰ Canada Industry Canada IC ‰ Regulatory Information‰ Europe EU Declaration of Conformity EN 300 Labelling ‰ USA-Federal Communications Commission FCC „ Notes ‰ Regulatory Notice for Channel Use in France Contents Contents Setting Up the Infrastructure Mode Before Setting Up Wireless NetworkSetting up the Ad Hoc Mode Disabling Wireless Network „ Planning for installation Before Setting Up Wireless NetworkInfrastructure Mode Ad Hoc Mode WPA/WPA2/802.1X ‰ Determine the security mode‰ Determine the Ssid WEP Press Password Setting Up the Infrastructure ModeEnter the administrator password and press OK „ Select network type Press on and press Next Press Wireless Setting Setting Up the Infrastructure Mode Press Available Network „ Specify Ssid‰ Selecting the Ssid from the available network list Press Ssid ‰ Entering the Ssid manually Screen returns to the Ssid Settings screen Press EAP-TLS and press Next „ Select security modePress WPA, WPA2 or 802.1X, and then Next Press Next Press Disable and press EAP User Name Encryption Between AP and STA Specify the following items and press Next Press YES, and wait until the setting is reflected Confirm the settings and press Finish Press Peap and press Next ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol EAP User Name Enter the following items and press Next Confirm the settings and press Finish Press Wpapsk or WPA2PSK and press Next ‰ Selecting WPAPSK/WPA2PSK security mode Specify the following items and press Next Press WEP button and press Next ‰ Selecting WEP security mode Specify the following items and press Next Press None and press Next ‰ Selecting no security mode Press YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Confirm the settings and press Finish button Select the transmit power and press Next button Press YES, and wait until the setting is reflected Press Password button Disabling Wireless Network Press OFF and press Next Appendix Specification Troubleshooting Glossary Description Specification When Cannot Connect to Toshiba MFP TroubleshootingWhen Error Messages are Displayed Glossary Numerics Index Index GN-1060 OME100082C0 GN-1060