Toshiba GN-1060 specification

MULTIFUNCTIONAL DIGITAL SYSTEMS

Operator’s Manual for Wireless LAN Module

GN-1060

2-17-2, HIGASHIGOTANDA, SHINAGAWA-KU, TOKYO, 141-8664, JAPAN

	R100520J2804-TTEC
©2011 - 2012 TOSHIBA TEC CORPORATION All rights reserved	Ver03 2012-03

Image 52

Toshiba GN-1060 manual

Contents

Operators Manual for Wireless LAN Module Page „ How to read this manual ‰ Symbols in this manual Preface‰ Model and series names in this manual ‰ Options ‰ Trademarks Precautions „ Precautions for Use„ About Toshiba Wireless Solution ‰ Wireless Interoperability ‰ Regulatory Information ‰ Canada Industry Canada IC‰ Europe EU Declaration of Conformity EN 300 ‰ USA-Federal Communications Commission FCC Labelling ‰ Regulatory Notice for Channel Use in France „ Notes Contents Contents Before Setting Up Wireless Network Setting Up the Infrastructure ModeSetting up the Ad Hoc Mode Disabling Wireless Network Before Setting Up Wireless Network „ Planning for installationInfrastructure Mode Ad Hoc Mode ‰ Determine the Ssid ‰ Determine the security modeWPA/WPA2/802.1X WEP Setting Up the Infrastructure Mode Press PasswordEnter the administrator password and press OK „ Select network type Press Wireless Setting Press on and press Next Setting Up the Infrastructure Mode ‰ Selecting the Ssid from the available network list „ Specify SsidPress Available Network ‰ Entering the Ssid manually Press Ssid Screen returns to the Ssid Settings screen Press WPA, WPA2 or 802.1X, and then Next „ Select security modePress EAP-TLS and press Next Press Disable and press EAP User Name Press Next Specify the following items and press Next Encryption Between AP and STA Confirm the settings and press Finish Press YES, and wait until the setting is reflected ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol Press Peap and press Next Enter the following items and press Next EAP User Name Confirm the settings and press Finish ‰ Selecting WPAPSK/WPA2PSK security mode Press Wpapsk or WPA2PSK and press Next Specify the following items and press Next ‰ Selecting WEP security mode Press WEP button and press Next Specify the following items and press Next ‰ Selecting no security mode Press None and press Next Press YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Select the transmit power and press Next button Confirm the settings and press Finish button Press YES, and wait until the setting is reflected Disabling Wireless Network Press Password button Press OFF and press Next Specification Troubleshooting Glossary Appendix Specification Description When Error Messages are Displayed TroubleshootingWhen Cannot Connect to Toshiba MFP Glossary Index Numerics Index GN-1060 OME100082C0 GN-1060