Disabling Wireless Network, Press Password button | Toshiba GN-1060

1 SETTING UP WIRELESS NETWORK

Disabling Wireless Network

When you enable the wireless network, the on-board NIC (Network Interface Card) will be disabled.

If you want to connect the equipment to wired network via the on-board NIC, you must disable the wireless network.

1 Pressmenu.[USER FUNCTIONS] button on the control panel to enter the User Functions 2 Press [ADMIN].

The ADMINISTRATOR PASSWORD screen is displayed.

3 Press [PASSWORD] button.

The input screen is displayed.

4 Enter the administrator password and press [OK].

The ADMIN menu is displayed.

5 Press [WIRELESS SETTING].

The WIRELESS SETTING menu is displayed.

Disabling Wireless Network 41

Image 43

Toshiba GN-1060 manual Disabling Wireless Network, Press Password button

Contents

Operators Manual for Wireless LAN Module Page ‰ Options „ How to read this manual ‰ Symbols in this manualPreface ‰ Model and series names in this manual ‰ Trademarks ‰ Wireless Interoperability Precautions„ Precautions for Use „ About Toshiba Wireless Solution EN 300 ‰ Regulatory Information‰ Canada Industry Canada IC ‰ Europe EU Declaration of Conformity Labelling ‰ USA-Federal Communications Commission FCC „ Notes ‰ Regulatory Notice for Channel Use in France Contents Contents Disabling Wireless Network Before Setting Up Wireless NetworkSetting Up the Infrastructure Mode Setting up the Ad Hoc Mode Ad Hoc Mode Before Setting Up Wireless Network„ Planning for installation Infrastructure Mode ‰ Determine the Ssid ‰ Determine the security modeWPA/WPA2/802.1X WEP „ Select network type Setting Up the Infrastructure ModePress Password Enter the administrator password and press OK Press on and press Next Press Wireless Setting Setting Up the Infrastructure Mode ‰ Selecting the Ssid from the available network list „ Specify SsidPress Available Network Press Ssid ‰ Entering the Ssid manually Screen returns to the Ssid Settings screen Press WPA, WPA2 or 802.1X, and then Next „ Select security modePress EAP-TLS and press Next Press Next Press Disable and press EAP User Name Encryption Between AP and STA Specify the following items and press Next Press YES, and wait until the setting is reflected Confirm the settings and press Finish Press Peap and press Next ‰ Selecting WPA/WPA2/802.1X security mode with Peap protocol EAP User Name Enter the following items and press Next Confirm the settings and press Finish Press Wpapsk or WPA2PSK and press Next ‰ Selecting WPAPSK/WPA2PSK security mode Specify the following items and press Next Press WEP button and press Next ‰ Selecting WEP security mode Specify the following items and press Next Press None and press Next ‰ Selecting no security mode Press YES, and wait until the setting is reflected Setting up the Ad Hoc Mode Wireless Setting screen is displayed Press AD HOC and press Next „ Specify Ssid Wireless LAN Security Settings screen is displayed Press WEP and press Next Select the transmit power and press Next Confirm the settings and press Finish button Select the transmit power and press Next button Press YES, and wait until the setting is reflected Press Password button Disabling Wireless Network Press OFF and press Next Appendix Specification Troubleshooting Glossary Description Specification When Error Messages are Displayed TroubleshootingWhen Cannot Connect to Toshiba MFP Glossary Numerics Index Index GN-1060 OME100082C0 GN-1060