Unisen 164 Series TV Control Panel, POWER Indicator, Power, TV control panel, System Reset, None

1. Basic Setup and Operation 13

TV Controls, continued

TV Control Panel

Buttons on the control panel duplicate some keys on the remote control.

•To display the main menu, press INPUT and VOL+

simultaneously for about 10 seconds. Press and hold INPUT and VOL+ for 10 seconds to clear the menu.

•Refer to left labels when no TV menus are dis- played.

•Refer to right labels when using TV menus or after activating a special function.

POWER

INPUT

ENTER

CH

VOL

TV control panel

System Reset

If the TV fails to respond to the remote control, the control-panel buttons, or will not power on/off, perform System Reset. Recent setting changes made before using System Reset may be lost.

To perform System Reset, press and hold the POWER button on the control panel for 10 seconds.

Panel-Lock Release

•To release the Panel Lock using the TV control panel, press and hold the INPUT button on the control panel for ten seconds. If the TV is off, press the POWER button to make it power on.

•To activate the Panel Lock, use the Lock menu, page 59.

POWER Indicator

POWER

Key

Off

Steady On

Slow Blinking

Fast Blinking

LED Color	TV Condition
None	TV is powered off. Normal operation.
Green	TV is powered on. Normal operation.
Green	TV powered off, auto-on TV Timer is set.
	Normal operation. TV can be turned on at any time.
Red/	TV may require service.
	• Hold power button on front panel for 10 seconds to reset TV.
Yellow
	• If LED continues to flash red and yellow after reset, turn off the
	TV and unplug it from the AC power source. Wait one minute
	and then plug the set back in.
	• If LED continues to flash red and yellow, go to
	www.mitsubishi-tv.com or call 1-800-332-2119 to receive Autho-
	rized Service Center information.
	You may be asked to count how many times the LED flashes
	each color to assist in troubleshooting.

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119