Unisen 164 Series Controlling an A/V Receiver after NetCommand Setup, With an HDMI Connection

6	NetCommand IR Control of an A/V
	Receiver

67

NetCommand IR home-theater control is avail- able on 265 series TVs. See the description of NetCommand on “About NetCommand IR Control,” page 60.

Two levels of NetCommand A/V receiver control are available through the Inputs > AVR menu.

•Power and volume. See the next page.

•Automatic audio and video switching over HDMI. See “Setup to Control Automatic Audio and Video Switching via HDMI,” page 70.

Note: To set up control of other device types, see “Initial NetCommand Setup,” page 62.

Controlling an A/V Receiver after NetCommand Setup

Switching Audio to and from the A/V Receiver

1.Press AUDIO.

2.Press to show the TV Speakers option.

3.Press to select either On (sound through TV speakers) or Off (sound through A/V receiver).

Controlling A/V Receiver Power

With Any Connection Type

1.Press AUDIO.

2.Press to show the TV Speakers option.

3.Press to select Off.

4.Point the remote control at the TV (not the A/V receiver) and press POWER to power the A/V receiver on or off.

With an HDMI Connection

1.Press INPUT.

2.Highlight the A/V receiver icon.

3.Press POWER.

Controlling Other A/V Receiver Functions

•With the A/V receiver powered on and selected, the TV’s remote control operates the volume and mute functions.

•If you have performed setup to control A/V receiver switching over HDMI, when you switch to a device in the Input Selection menu, the A/V receiver will automatically switch to the correct audio input for the device.

Note: Connect the HDMI cable between the TV and A/V receiver first before performing NetCommand setup for the A/V receiver. If you perform NetCommand setup and then later con- nect the cable, the NetCommand setup will be lost.

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119