Unisen 164 Series Operating NetCommand-Controlled Devices, continued, Special Operation Methods

645. NetCommand IR Control (265 Series)

Operating NetCommand-Controlled Devices, continued

Special Operation Methods

Key Name in	Special Operation Description and Setup	How to Use
Learning Screen
Power On	Manual Power On/Off	1.	Press INPUT.
	Use for devices that have only one POWER key.	2.	Highlight the icon for the device to be
			powered on or off.
		3.	With the Input Selection menu still dis-
			played, press POWER to send the power
			signal; you may need to press POWER twice.
		Note:		If you press POWER without the Input Se-
				lection menu displayed, the TV will turn
				off.
		4.	Press ENTER to switch the TV to the device.
Power On	Automatic Power On/Off	•	To Power On the Device
Power Off	This feature is only for devices that have separate		1.	Press INPUT.
	Power On and Power Off keys on their original
			2. Highlight the icon for the device to be
	remote controls. If your device does not have a
				powered on or off.
	separate Power Off key, do not use the Power
			3.	Press ENTER to switch the TV to the
	Off learning position; use only the Manual Power
				device and NetCommand will send the
	ON/OFF method described above.
				Power On command to the device.
	In the NetCommand Learn screen:
		•	To Power Off the Device
	a. “Learn” the Power On command in the
			When you turn the TV off, the TV sends all
	Power On learning position.
			learned Power Off commands to all devices.
	b. “Learn” the Power Off command in the
	Power Off learning position.
Menu	Displaying a Menu for the Current Device	Press TOOLS and number 3 to send the menu
	“Learn” the MENU key on the original remote in the	signal to the device.
	Menu learning position.
Guide	Displaying the On-Screen Program Guide	1.	While watching the device, press GUIDE to
	(cable box or satellite receiver)		display the guide.
	1. “Learn” the Guide key on the original remote in	2.	Press PAGE to send the Page Up/Dn com-
	the Guide learning position.		mands for the guide.
	2. Learn the PAGE UP and PAGE DOWN keys of the
	original remote in the Page Up and Page
	Down learning positions.
Enter	ENTER-Key Functions (cable boxes, satellite receivers, etc.)
	Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
	SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand
	uses the same ENTER key for both operations.

When ENTER has a menu or guide function or when the original remote control uses the same key for menus and channel selection:

Learn the ENTER, SELECT, or OK key in the NetCommand Enter learning position.

1.Press MENU or GUIDE to display the device’s menu or guide.

2.Press ENTER within the menu and NetCommand will send the Enter signal for menus.

DownloadedFor assistanceFrom TV-Manualcall.com1(800)Manuals 332-2119