Unisen 265 Series Enter digits, CANCEL as the Cancel or Exit Function, separator, How to Use

	5. NetCommand IR Control (265 Series)		65
Operating NetCommand-Controlled Devices, continued
Key Name in	Special Operation Description and Setup	How to Use
Learning Screen
Enter (digits)	When ENTER is for channel changes, i.e., the origi-	Press digit key(s) and then press ENTER.
	nal remote control has a separate ENTER key for	NetCommand will send the Enter signal for
	this function):	channel selection.
	Learn the ENTER key for channel selection in
	the NetCommand Enter (digits) learning posi-
	tion. Use this learning position only if the original
	remote control has separate keys for Enter in
	menus and Enter for channel selection.
Cancel	CANCEL as the Cancel or Exit Function	1. Press MENU or GUIDE to display the menu or
	“Learn” the Cancel or Exit function in the	guide.
	NetCommand Cancel learning position	2. Press CANCEL and NetCommand will send
		the Cancel or Exit signal.
—	The symbol “—” can serve as the separator	Press digit key(s) and press CANCEL.
(separator)	between a digital channel’s main and sub-channel	NetCommand will send the channel-separator
	digits, e.g., digital channel 12-1 (main channel is	signal.
	12, sub-channel is 1).
	“Learn” the channel separator function in the
	NetCommand – (separator) learning position.

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119