Setup Menu | Mark Levinson |
No320S Setup
setup button
RESTORING
enter button
SAVING DATA
NO CHANGE
Navigating the Setup Menu (continued)
To open the setup menu:
Press and release the front panel or remote control setup button.
•When the setup menu is closed, pressing and releasing the setup button opens the setup menu on the front panel display as shown to the left. The front panel setup LED lights red to indicate that the setup menu is open.
Both the front panel and remote control can be used to navigate the setup menu structure shown in the illustration on the previous page. The bulleted items that begin below indicate the commands the front panel and remote control perform when the setup menu is open.
•Returns to the previous menu, eventually closing the setup menu.
•Deselects the selected parameter without saving setting adjustments that have not been previously stored. The RESTORING message will appear on the front panel display as shown to the left to indicate that new adjustments are not being stored.
•Advances to the next menu.
•Selects the current parameter. When a parameter is selected, the equal sign (=) between the parameter label and the parameter setting will blink to indicate that setting adjustments can be made with the volume knob or volume ± buttons.
•Deselects the selected parameter, saving setting adjustments that have not been previously stored. The SAVING DATA message will appear on the front panel display as shown to the left to indicate that new adjustments are being stored.
Note
When a parameter is deselected, the NO CHANGE message will appear on the front panel display as shown to the left if no changes have been made to the parameter’s last stored setting.
