Mark Levinson N 320S Set Inputs Menu, select knob & ± buttons volume knob & ± buttons, Default

Nº 320S

select knob &

± buttons

volume knob &

± buttons

Setup Menu

Scroll through menu items. Rotating the select knob or pressing the select ± buttons scrolls upward (clockwise/+) and downward (counterclockwise/–) through all menu items available on the open menu. The front panel display indicates the current menu item.

Adjusts the selected parameter setting. Rotating the volume knob or pressing the volume ± buttons increases (clockwise/+) and decreases (counterclockwise/–) the selected parameter setting in the designated increment. The front panel display indicates the current setting. (If the current parameter has not been selected with the enter button, rotating the volume knob or pressing the volume ± buttons automatically selects the current parameter before making adjustments.)

Set Inputs Menu

Selecting Set Inputs prompts the selection of the desired input (e.g., Input 1). Selecting an input opens the corresponding Set Inputs menu as shown below, which can be used to change input names, optimize input gain levels, offset input volume levels, and assign record output connectors.

3-3

No320S Setup

Set Inputs

Teach IR

Mute = -20.0

MaxVol= 80.0

Trig.= 12v,L

Sw 1.00 B.18

enter

Set Input 1

Set Input 2

Set Input 3

Set Input 4

Set Input 5

Set Input 6

Set Input 7

enter

Name=INPUT 1

Gain= +6 dB

Offset= 0.0

Rec.Out=NONE

Input 1 is used here as an example and will continue to be used as an example throughout this section.

	Default	Possible
Parameter	Setting	Settings
Name	INPUT	Factory-Default, Custom
Gain	+6 or +12dB*	+0dB, +6dB, +12dB, +18dB
Offset	0.0dB	–20.0 to +20.0dB
Rec.Out	NONE	NONE, #1, #2, BOTH

*The factory-default Gain parameter setting is +0dB for Inputs 1-3and +6dB for Inputs 4-7.

(continued)