Mark Levinson N 320S owner manual Rear Panel Overview, Nº 320S, 1.~ac mains connector, Outlets

Nº 320S

Basic Operation

10

4

5

7

8

9

4

1

MARK LEVINSON

record outputs

communication

RS-232

record outputs

RIGHT CHANNEL

LEFT CHANNEL

~ac mains

PREAMPLIFIER Nº 320S

trigger

ir

S/N

Made in the U.S.A.

output

input

main outputs inputs inputs main outputs

1 2 slave in 1 2

phono

ground

1 2 3 4 5 6 7 7 6 5 4 3 2 1 2 1

3 2 6 2 3

The numbers in the Nº 320S rear panel illustration shown above correspond to the numbered items in the Rear Panel Overview section that begins below. For maximum channel separation, all left-channel connectors are located on one side of the rear panel and all right- channel connectors are located on the opposite side of the rear panel.

Rear Panel Overview

CAUTION

NEVER MAKE OR BREAK CONNECTIONS TO THE Nº 320S

UNLESS IT AND ALL ASSOCIATED COMPONENTS ARE

POWERED OFF AND DISCONNECTED FROM ELECTRICAL 2-5

OUTLETS.

1.~ac mains connector

Provides power to the Nº 320S through the supplied power cord when the supplied power cord is connected to the ~ac mains connector and the electrical outlet. One IEC-standard AC mains receptacle labeled ~ac mains is available.

Note

Before operating the Nº 320S, make sure the ~ac mains connector label indicates the correct operating voltage (page 1-7) for the current location.

(continued)