Nº 320S
“Missing” Input
No Link Controls
Erratic Behavior
If All Else Fails...
Troubleshooting & Maintenance
1.Make sure the Name parameter for the selected input has not been set to unused.
1. Make sure the slave chain includes Mark Levinson components that are compatible with the Nº 320S.
2. Examine Link connections to ensure a solid connection between linked components.
3. Make sure Link connections have been made using Link communication ports and supplied or constructed Link communication cables.
4. Make sure constructed Link communication cables have been twisted 180˚ as shown in the illustration at the bottom of page
5. Examine the slave chain to ensure that connections meet all of the requirements listed in the table on page
6. Make sure Link controls have been enabled on the linked digital transport(s) linking menu, which allows activation and deactivation of individual Link controls. Refer to the appropriate digital transport owner’s manual for additional information.
7. Make sure linked components have been powered on in the
order specified in step 4 (page
1.Power cycle the Nº 320S, waiting at least 10 seconds between powering the Nº 320S off and on.
2.Restore
1.Power cycle the Nº 320S, waiting at least 10 seconds between powering the Nº 320S off and on.
2.Restore
3.Contact an authorized Mark Levinson dealer.
4.Contact Mark Levinson Customer Support at
(continued)