Mark Levinson N 320S owner manual To begin using the Nº 320S

Nº 320S Getting Started

CAUTION

NEVER MAKE OR BREAK CONNECTIONS TO THE Nº 320S

UNLESS IT AND ALL ASSOCIATED COMPONENTS ARE

POWERED OFF AND DISCONNECTED FROM ELECTRICAL

OUTLETS.

To begin using the Nº 320S:

1.Make sure the Nº 320S and all associated components are powered off and disconnected from electrical outlets.

Note

The Nº 320S offers balanced (XLR) and single-ended (RCA) stereo connections. For best performance, use balanced (XLR) connections whenever possible. A balanced connection between the Nº 320S and the associated power amplifier will offer the highest possible performance with the best protection against RF interference and other common mode noise.

1-9

2.Connect the desired Nº 320S stereo input connectors to the source component (e.g., CD player) output connectors.

•Use the Nº 320S balanced (XLR) stereo input connectors labeled 1, 2, or 3 if the source component offers balanced (XLR) output connectors.

•Use the Nº 320S single-ended (RCA) stereo input connectors labeled 4, 5, 6, or 7 if the source component does not offer balanced (XLR) output connectors.

3.Connect the desired Nº 320S stereo main output connectors to the associated power amplifier.

•Use the Nº 320S balanced (XLR) stereo main output connectors if the associated power amplifier offers balanced (XLR) input connectors.

•Use the Nº 320S single-ended (RCA) stereo main output connectors if the associated power amplifier does not offer balanced (XLR) input connectors.

(continued))