Mark Levinson N 320S owner manual Linking, Making Link Connections, The Nº 320S is compatible with

Nº 320S Basic Operation

Linking

Linking is available for all Mark Levinson components that offer Link communication ports, including master, slave in, slave out,

and communication ports. These communication ports can be used to “link” compatible Mark Levinson components in a slave chain, allowing them to share controls such as display intensity, standby, playback, input selection, and record.

The Nº 320S offers two Link communication ports labeled slave

in and . The slave in communication port can be connected to a compatible Mark Levinson digital audio processor or digital

transport. The communication port can be connected to a compatible Mark Levinson power amplifier.

The Nº 320S is compatible with:

•All power amplifiers that offer Link or communication ports.

•Nº 30, Nº 30.5, and Nº 30.6 Reference Digital Audio Processors

•Nº 31 and Nº 31.5 Reference CD Transports

•Nº 36, Nº 36S, Nº 360, and Nº 360S Digital Audio Processors

Making Link Connections

• Nº 39 and Nº 390S CD Processors (can be used as either digital audio processors or digital transports in a slave chain)

• Nº37 CD Transport

• Refer to the appropriate documentation for Link compatibility information about other Mark Levinson components.

Note

Linking is not available for Mark Levinson digital transports unless a Mark Levinson digital audio processor is included in the slave chain. Certain digital transport and digital audio processor combinations are not Link compatible. Refer to the appropriate owner’s manual for additional information.

•DO use Link communication ports, such as master, slave in,

slave out, and communication ports. DO NOT use RS-232ports or other rear panel connectors.

•DO use supplied Link communication cables, which are provided in the Nº 320S accessory carton. Additional Link communication cables are available at authorized Mark Levinson dealers.

2-9

(continued)