Mark Levinson N 320S polarity button, balance button, display button, mono button, mute button

Basic Operation

2-18

Mark Levinson

Command Overview (continued)

7.polarity button

Controls the polarity of the main output signal. Pressing and releasing the polarity button toggles between inverting and restoring main output signal polarity. The front panel polarity LED lights red to indicate that main output signal polarity is inverted. The polarity button has no affect on record output signal polarity. Refer to Polarity (page 4-3) for additional information.

8.balance button

Opens and closes the balance control, which can be used to control the left-to-right channel balance of the main output connectors. The front panel balance LED lights red to indicate that the balance control is open. Refer to Balance (page 4-3) for additional information.

Note

When the balance control is closed, the front panel balance LED remains lit if the left-to-right channel balance of the main output connectors is offset.

9.display button

Controls the illumination level of front panel display characters and the front panel standby LED. Refer to Display Intensity (page 4-2) for additional information.

10.mono button

Activates and deactivates the selected mode of mono playback. The front panel mono LED lights red to indicate that the mono playback is activated. Refer to Mono Playback (page 4-5) for additional information.

11.mute button

Activates and deactivates mute. Pressing and releasing the mute button once activates mute and attenuates master volume by the selected mute level. The front panel mute LED lights red to indicate that mute is activated. Pressing and releasing the mute button again restores master volume to its original level.