Mark Levinson N 320S stereo record output connectors, balance, do not affect record output levels

Nº 320S Basic Operation

4.stereo record output connectors

Provide left and right-channel analog audio output at fixed levels. Two single-ended (RCA) connectors labeled 1 and 2 are available to output single-ended signals to recording components such as CD-Rs and tape decks.

The Rec.Out parameter can be used to assign the record output connectors to the desired input(s). It is recommended to use the Name parameter to associate inputs with the correct recording components to prevent possible record feedback loops.

Note

Nº 320S volume controls, including master volume and

balance, do not affect record output levels.

5. & slave in communication ports

Provide “links” to compatible Mark Levinson components, allowing the Nº 320S and other linked components to share

controls such as display intensity, input naming, standby,2-7playback, input selection, and record. Two 8-pin modular

RJ-45 jacks labeled and slave in are available.

The communication port can be connected to a Mark Levinson power amplifier that offers Link communication ports. The slave in communication port can be connected to a compatible Mark Levinson digital audio processor or digital transport that offers Link communication ports.

Note

Refer to Linking (page 2-9) BEFORE linking the Nº 320S to other Mark Levinson components.

(continued)