Mark Levinson N 320S owner manual Placement, Quantity

Nº 320S

Placement

	Getting Started
Item	Quantity
Detachable AC power cord	1
Link communication cable	1
1/8-inch hex key	1
Phillips-head screwdriver (size 1)	1
Nº 320S remote control	*	1
White gloves (pair)**	1
Warranty & Product Registration Card	1

*The remote control comes with two AAA batteries, which should be replaced as needed.

**The white gloves are provided to assist with the initial unpacking and installation of the Nº 320S.

•DO install the Nº 320S on a solid, flat, level surface such as a shelf or table.

•DO install the Nº 320S close to associated components to keep interconnect cabling as short as possible.

1-5

Note

In some cases, it is better to use longer interconnect cabling between the preamplifier and the power amplifier to allow for shorter loudspeaker wires.

•DO select a dry, well-ventilated location out of direct sunlight.

•DO allow at least a 4-inch clearance above the Nº 320S for proper heat dissipation. It is strongly recommended to install the Nº 320S on its own shelf for proper ventilation.

•DO refer to Dimensions (page A-3) for assistance with custom installations.

•DO NOT place the Nº 320S on a thick rug or carpet or cover the Nº 320S with a cloth, as this might prevent proper cooling.

•DO NOT expose the Nº 320S to high temperatures, humidity, steam, smoke, dampness, or excessive dust. Avoid installing the Nº 320S near radiators and other heat-producing appliances.

(continued)