Mark Levinson N 320S Restoring Factory-Default Settings, To restore factory-defaultsettings

Troubleshooting & Maintenance Mark Levinson

CLEAR SETUP?

5-4

(continued)

Restoring Factory-Default

Settings

Performing this procedure restores all parameters and user-defined controls to their factory-default settings. Before performing this procedure, it is recommended to record all custom settings on the Installation Worksheet (page A-4).

To restore factory-default settings:

1.Press and release the front panel power button to power off the Nº 320S. It is also recommended to power off all associated components.

2.Press and hold the front panel setup and display intensity buttons.

3.Still holding the setup and display intensity buttons, press and release the power button to power on the Nº 320S.

•The CLEAR SETUP? message will appear on the front panel display as shown to the left.

4.Choose one of the following:

•To restore factory-default settings, continue holding the setup and display intensity buttons for about 10 seconds. The FACTORY SETTINGS RESTORED message will blink on the front panel display as shown below when factory- default settings have been restored.

FACTORY SETTINGS RESTORED

•To cancel restoration of factory-default settings, release the setup and display intensity buttons. The CLEAR and CANCELLED messages will blink on the front panel display as shown below to indicate that restoration of factory default settings has been cancelled.

CLEAR CANCELLED

5.Power on all associated components that were powered off in step 1.