Mark Levinson N 320S owner manual 4-10, Controls & Modes, Name=INPUT, Name= Name=SSP SAVING DATA

Controls & Modes Mark Levinson

Name=INPUT 1

Input 1 is used here as an example and may be substi- tuted for whichever input was selected in step 3 (page 4-9).

Name=_______

Name=SSP

SAVING DATA

4-10

SSP (Surround Sound Processor) Mode (continued)

7.Press and hold the front panel or remote control setup button until the Name parameter for the selected input opens on the front panel display as shown to the left.

•The front panel setup LED lights red to indicate that the setup menu is open.

8.Press the front panel or remote control enter button once to select the Name parameter and access the custom names list.

•The current input name will blink on the front panel display as shown to the left to indicate that a new input name can be selected from the custom names list.

9.Rotate the front panel volume knob or press the remote control volume ± buttons to scroll through all custom input names until the SSP name appears on the front panel display as shown to the left.

10.Press the enter button to select the SSP name, which activates SSP mode.

•The SAVING DATA message will appear on the front panel display as shown to the left to indicate that the SSP name is being saved.