Toshiba VF-A7 Meter output, Setting of meter outputs, Setting of optional meter outputs

These parameters are used to set the pulse output function and the number of pulses output from the output terminal FP.

6.28 Meter output

6.28.1 Setting of meter outputs

 ：AM terminal meter selection

 ：AM terminal meter adjustment

Refer to 5.4 for details.

6.28.2 Setting of optional meter outputs

 ：Optional analog terminal #1 meter selection

 ：Optional analog terminal #1 meter adjustment

 ：Optional analog terminal #2 meter selection

 ：Optional analog terminal #2 meter adjustment

 ：Optional analog terminal #1 meter offset

 ：Optional analog terminal #2 meter offset

 ：Optional analog terminal #2 sign selection

6.28.3 Pulse output to meters

・Function

 ：FP terminal meter selection

 ：FP terminal meter adjustment

The function set with  is output from FP terminal. Set a desired number of output pulses as  with

reference to the following table. Refer to 5.4 about adjustment level.

Ex.)Output Running frequency(0～80Hz) at 0～10kHz Setting: =, =, =

Title Function Adjustment range

0:Running frequency

1:Frequency command

2:Current

3:DC voltage

4:Output voltage

5:After-compensation frequency

6:Speed feedback (real-time value)

7:Speed feedback (1 second filter)

8:Torque

9:Torque reference

10:Internal torque reference (*1)

11:Torque current

12:Exciting current

13:PID feedback value

14:Motor overload factor (OL2 data)

15:Inverter overload factor (OL1 data)

FP terminal meter 16: PBr overload factor (PBrOL data)

 selection	17: PBr load factor (pulse duty)
	18: Input power
	19: Output power
	20: Peak output current
	21: Peak DC voltage
	22: Motor counter dummy PG
	23: Position pulse
	24: PR input
	25: VI/II input
	26: RX input
	27: RX2 input
	28: FM output
	29: AM output
	30: Fixed output for meters
	31: Analog output for communication
	32:Acc/dec torque removal
	33:Current (with filter)

	FP terminal meter	～ [kHz]
	adjustment

Adjustment level Default setting

(a)
(a)
(b)
(b)
(b)
(a)
(a)
(a)
(b)
(b)
(b)
(b)
(b)
(a)
(c)
(c)
(c)	
(c)
(e)
(e)
(b)
(b)
(d)
(d)
(c)
(c)
(c)
(c)
(c)
(c)
－
(c)
(b)
(b)
	

Note) ON pulse width is fixed at a value that depends on the setting of .(about 50~70%) The data of current, torque, etc. are limited by 200 %.

F-65