Toshiba VF-A7 instruction manual Information on input terminals

(Continued from the preceding page)

Com.No. Details of indication Key operated LED display

Description

FE10	Past trip #1	▲	⇔	(Alternately blinking at intervals of 0.5
				second) Past trip #1
FE11	Past trip #2	▲	⇔	(Alternately blinking at intervals of 0.5
				second) Past trip #2
FE12	Past trip #3	▲	⇔	(Alternately blinking at intervals of 0.5
				second) Past trip #3
FE13	Past trip #4	▲	⇔	(Alternately blinking at intervals of 0.5
				second) Past trip #4
FE14	Cumulative	▲		Indication of total (accumulated) operation
	operation time			hours(Indication of 0.1 represents 10 hours.)
	Standard monitor	MON		Running frequency indication(in operation)
	mode	（Note 1）
Note 1: When ▲ or ▼ key is pressed, indication changes in the status monitor mode.

Note 2: Contents of status indications of *1, *2, *3, *4 and *5 can be selected from 30 kinds of information. Unit of current and voltage indications can be changed from % to A (amperage) and V (voltage) and vice versa respectively.

Note 3: Indicated input voltage is DC voltage just after input voltage is rectified multiplied by 1/√2.

Note 4: Past trip is in order of 1(last)→2→3→4(oldest)

Note 5: Cumulative operation time indicates a total of actually running hours.

■Information on input terminals

Information on  input terminals and  input terminals are for the optional add-on cassette.

Optional add-on cassette

Input terminal #1（F）	:F111	:0
Input terminal #2（R）	:F112	:1 When there is signal input
Input terminal #3（ST）	:F113	:2
Input terminal #4（RES）	:F114	:3 When there is no signal input
Input terminal #5（S1）	:F115	:4 (Blank in the upper half)
Input terminal #6（S2）	:F116	:5
Input terminal #7（S3）	:F117	:6
Input terminal #8（S4）	:F118	:6



Input terminal #9 （B8）	:F119	:8	When there is signal input
Input terminal #10（B9）	:F120	:9
Input terminal #11（B10）	:F121	:10 When there is no signal input
input terminal #12（B11）	:F122	:11 (Blank in the upper half)

	
		Input terminal #13（B12）	:F123	:12 When there is signal input
		Input terminal #14（B13）	:F124	:13
		Input terminal #15（B14）	:F125	:14 When there is no signal input
		Input terminal #16（B15）	:F126	:15 (Blank in the upper half)
		Input terminal #9 to #16: Expansion TB option unit

Note) When  is set at a number of  to  expansion TB option input terminal information (,) indicate information of lower 8 bit terminal (B0～B7).

H-2