Toshiba VF-A7 instruction manual Status monitor mode

8.Monitoring operation status

8.1 Status monitor mode

Status of the inverter can be monitored.

To monitor the inverter when it is normally running,

Press the MON key twice and the current status is indicated on the LED display.

＊1

＊2

＊3

＊4

＊5

Setup procedure to monitor the inverter status. (EX. Operation at 60 Hz)

Com.No.	Details of indication	Key operated	LED display	Description
	Standard monitor			Running frequency indication (in operation)
―				(In the case monitor display mode setting
	mode			 is set at [running frequency])
FE01	Parameter setup	MON		Indication of "Automatic acceleration
				/deceleration()" that is the first basic
	mode			parameter
	Status monitor	MON		Indication of rotating direction
FE01	mode (rotating		
				(: forward, : reverse)
	direction)
―	Frequency	▲		Indication of frequency command value.
	command			(In case of =)
―	Load indication	▲		Indication of inverter output current (load
				current)(In case of =)
―	DC voltage	▲		Indication of inverter DC voltage (Default
				setting unit: [%]) (In case of =)
―	Output voltage	▲		Indication of inverter output voltage (Default
				setting unit: [%]) (In case of =)
	Input terminal			Indication of ON/OFF status of control input
		▲		terminals (F, R, RES, ST, S1, S2, S3, S4) in
	information #1
FE06				bits
FE50	Input terminal	▲		Indication of ON/OFF status of optional control
FE51	information #2			input terminals (B8,B9,B10,B11) in bits
	Input terminal	▲		Indication of ON/OFF status of optional control
	information #3			input terminals (B11,B12,B13,B14) in bits
	Output terminal	▲		Indication of ON/OFF status of control output
FE07	information #1			terminals (OUT1,OUT2,FL) in bits
	Output terminal	▲		Indication of ON/OFF status of optional control
FE52	information #2			output terminals (R1,R2,OUT3,OUT4) in bits
FE53	Output terminal	▲		Indication of ON/OFF status of optional control
	information #3			output terminals (ALM0,ALM1,ALM2,ALM3) in
				bits
FE48	Sink/source	▲		Indication of sink or source status
	switching status			(: source, : sink)
FE47	Type of connected	▲		Indication of connected options
	option
FE54	 last set data	▲		Indication of  value set last
FE55	 last set data	▲		Indication of  value set last
FE08	CPU version	▲		Indication of version of the CPU
FE43	Flush memory	▲		Indication of version of the flush memory
	version
FE09	Control EEPROM	▲		Indication of version of the control EEPROM
	version
FE44	Drive EEPROM	▲		Indication of version of the drive EEPROM
	version

(Continued on the following page)

H-1