Toshiba VF-A7 Title Function Set value , Operation command, Mode selection, Selection

RUN STOP key on the control

1) Setting the start, stop and operation frequencies with the operating panel

Title	Function	Set value
	Operation command	(operating panel)
	Mode selection
	Speed setting mode	(operating panel)
	selection

[Start/stop]: Press the panel.

☆To switch between forward run and reverse run, use the forward/reverse run selection parameter .

[Frequency ref.]: Set the frequency, using the

▲

▼key on the operating panel.

Power	R/L1		U/T1
	S/L2		V/T2
supply
	T/L3		W/T3
			F
	Control panel		R
			ST
	G/E		CC
	CC RX	VI II RR PP

Motor

IM

The inverter is shipped with these terminals shorted.

To save the frequency, press the Enter key. Then,  and the set frequency are displayed alternately for a while.

2)To set the start and stop frequencies (forward run, reverse run and free-run stop) by means of external signals and to set the operation frequency with the control panel

Title	Function	Set value
	Operation command	(Terminal input)
	Mode selection
	Speed setting mode	(operating panel)
	selection

[Start/stop]: Connection and disconnection of terminals F-CC/R-CC (Standby: connection of terminals ST and CC)

[Speed command]: Set the frequency, using the

▲ ▼ key on the control panel.

	R/L1	U/T1	Motor
Power			IM
	S/L2	V/T2
supply	T/L3	W/T3
		F	Forward run if ON
			Slowdown stop if OFF
		R	Reverse run if ON
	Control panel		Slowdown stop if OFF
		ST	Standby if ON,
	G/E		Coast stop if OFF
		CC
	CC RX	VI II RR PP

★As for the action the motor takes when both the terminals F and R are connected at the same time, you can make selection between reverse run and a stop. => Refer to 6.2.2.

★To save the frequency, press the Enter key. Then,  and the set frequency are displayed alternately for a while.

E-8