Toshiba VF-A7 instruction manual RS-232C Communication Converter cable

No.	Option name	Function, purpose.
		If this unit is used to connect the inverter and a personal computer and so on with each other, data communication can
		be performed between the two besides easy adjustment of parameters, saving and writing data.
			<Outline drawings with dimensions>
			5m
	RS-232C
⑭	communication
	converter cable
		RJ45 connector
				D-Sub 9pin connector

(Model: RS20035)

More than one inverter can be controlled with a personal computer and so on if this unit is used for connection between inverters and personal computer.

･Computer link:Since this unit makes it possible to connect inverters with higher-class computer, FA computer, etc., a data communication network can be constructed among multiple inverters.

･Communication among inverters: For the purpose of proportional operation of multiple inverters, a frequency data communication network can be constructed among multiple inverters.

<Outline drawings with dimensions>

	RS-485 communication	２５		１００
⑮	converter unit	１６.５	Ｒ２.５	５
	(for communication with
	multiple inverters)
	１８０	１６８（Mounting dimension）	１６０
	Ｒ２.５
		６
		８.５
		４	１
		３０

		(Model: RS4001Z)	(Model: RS4002Z)
		Connection cable for connecting parameter writer, extension control panel,
⑯	Communication cable	RS-232C communication units, and RS-485 communication units.
		Cable types: CAB0011 (1 m), CAB0013 (3 m), CAB0015 (5 m).
⑰	Remote control panel	A frequency meter, frequency setup device, RUN/STOP (forward, reverse) switch
		are built in this operation panel. (Model: CBVR-7B)
		Applied control units of the AP series make various applied control possible if they
		are used in combination with the inverter.
		■Proportional control panel (APP-2B)	■Process control panel with built-in PI
		■Ratio setup panel (APH-7B)	controller (APJ-2B)
⑱	Application control units	■Regulated power supply board (APV-2B)	■TG follower panel (APF-7B)
		■Cushion starter panel (APC-2B)	■Current detection panel (APD-2B)
		■Synchronizing control panel	■Torque control panel (APL-2B)
		(APS-2B1)	■FV converter (APR-2B)
		■Synchronizing transmitter (DRR-2)	■Loop controller (APU-2B)

■Remote control panel (APM-2B)

	Harmonic suppression	･ Higher harmonic suppressor unit improves input power-factor by suppressing
		harmonic current.
	converter
⑲		･ Power regenerator unit protects the inverter from load sprung from frequent rapid
	Power regeneration	deceleration and negative torque.
	converter
		For applicable models and particulars, inquire at our office.

Option ⑩～⑮ should be used under the condition of 9600 bps or less ().

I-8