Toshiba VF-A7 Speed/torque reference gain/bias setup 2/2, Operation frequency, Braking, Jogging

J-7

[7] Speed/torque reference gain/bias setup (2/2)					Sensorless vector/vector with sensor (●valid, －:invalid)
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0228	BIN reference point #1	-100～100 [%]	1/0.01	0	Enabled	●/●	●/●	－	●	※
	0229	BIN reference point #1 frequency	-～ [Hz] (*1)	0.01/0.01	0.0	Enabled	●/●	－	－	●	※
	0230	BIN reference point #2	-100～100 [%]	1/0.01	100	Enabled	●/●	●/●	－	●	※
	0231	BIN reference point #2 frequency	-～ [Hz] (*1)	0.01/0.01	80.0	Enabled	●/●	－	－	●	※
	0232	BIN reference point #1 rate	-250～250 [%] (For torque control, etc.)	1/0.01	0	Enabled	●/●	●/●	－	●	※
	0233	BIN reference point #2 rate	-250～250 [%] (For torque control, etc.)	1/0.01	100	Enabled	●/●	●/●	－	●	※
	0234	Pulse reference point #1	-100～100 [%]	1/0.01	0	Enabled	●/●	－	－	●	※
	0235	Pulse reference point #1 frequency	-～ [Hz] (*1)	0.01/0.01	0.0	Enabled	●/●	－	－	●	※
	0236	Pulse reference point #2	-100～100 [%]	1/0.01	100	Enabled	●/●	－	－	●	※
	0237	Pulse reference point #2 frequency	-～ [Hz] (*1)	0.01/0.01	80.0	Enabled	●/●	－	－	●	※
(*1): Adjustment range is -327.68～327.67 [Hz] in case of 16-bit access.
[8] Operation frequency
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0240	Start-up frequency	0.0～10.0 [Hz]	0.01/0.01	0.1	Enabled	●/●	－	－	●	6.7.1
	0241	Run frequency	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.7.2
	0242	Run frequency hysteresis	0.0～30.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.7.2
	0243	Stop frequency	0.0～30.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.7.1
	0244	0 Hz dead band frequency	0.0～5.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.7.3
[9] DC	injection	braking
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0250	DC injection braking start frequency	0.0～120.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.8.1
	0251	DC injection braking current	0.0～100.0 [%]	0.1/0.01	50.0	Enabled	●/●	－	－	●	6.8.1
	0252	DC injection braking time	0.0～10.0 [s]	0.1/0.01	1.0	Enabled	●/●	－	－	●	6.8.1
	0253	Forward/reverse DC braking priority control	0: OFF, 1: ON	－	0	Enabled	●/●	－	－	●	6.8.1
	0254	Motor shaft fixing control	0: Disabled, 1: Enabled	－	0	Enabled	●/●	－	－	●	6.8.2
	0255	Zero-speed stop mode selection	0: Standard(DC injection breaking), 1: 0Hz command	－	0	Disabled	－/●	－	－	●	6.8.3
[10]	Jogging	operation
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0260	Jog run frequency	0.0～20.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.9
	0261	Jog stop control	0: Deceleration stop		0	Enabled	●/●				6.9
			1: Coast stop	－				－	－	●
			2: DC injection braking stop

※(Reference section): Refer to the inverter's individual manual.