Toshiba VF-A7 Jumper frequency, Preset speed operation frequency 8- to 15-stage speed

J-8

[11] Jumper frequency					Sensorless vector/vector with sensor (●valid, －:invalid)
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0270	Jump frequency #1	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.10
	0271	Jump frequency band #1	0.0～30.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.10
	0272	Jump frequency #2	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.10
	0273	Jump frequency band #2	0.0～30.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.10
	0274	Jump frequency #3	0.0～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.10
	0275	Jump frequency band #3	0.0～30.0 [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	6.10
	0276	Object of jump frequency process	0: Process amount, 1: Output frequency	－	1	Enabled	●/●	－	－	●	6.10
[12] Preset speed operation frequency (8- to 15-stage speed)
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0287	Preset-speed #8	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0288	Preset-speed #9	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0289	Preset-speed #10	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0290	Preset-speed #11	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0291	Preset-speed #12	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0292	Preset-speed #13	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0293	Preset-speed #14	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
	0294	Preset-speed #15	～ [Hz]	0.01/0.01	0.0	Enabled	●/●	－	－	●	5.14
[13] PWM carrier frequency
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0300	PWM carrier frequency	0.5～15.0(8.0, 5.0) [kHz] (*1)	0.1/0.001	See J-28	Disabled	●/●	●/●	－/●	●	6.12
(*1)Upper	limits differ	by applicable motor capacity.	For details, refer to 6.12.
Carrier frequency is automatically limited to less than 10kHz when operation frequency is more than 130Hz.
[14] Tripless intensification setup (1/2)
Title	Communi	Function	Adjustment range	Min. unit (panel/	Default	Write during	Vector control			V/f	Reference
							Speed	Torque	Position
	cation No			communication)	setting	running	control	control	control	Constant	section
	0301	Auto-restart	0: Disabled, 1: Enabled(at power failure),	－	0	Enabled	●/●	●/●	－/●	●	6.13.1
			2: Enabled(at ST ON/OFF), 3: Enabled(1+2)
	0302	Regenerative power ride-through	0: OFF, 1: ON, 2:ON(Deceleration stop)	－	0	Enabled	●/●	－/－	－/－	●	6.13.2
		control / Deceleration stop
	0303	Retry selection	0: Disabled, 1 to 10 times	－	0	Enabled	●/●	●/●	－/●	●	6.13.3
	0304	Dynamic braking mode selection	0: Disabled, 1: Enabled/overload detection enabled	－	See J-28	Enabled	●/●	●/●	－/●	●	6.13.4
	0305	Over-voltage stall protection	0: Enabled, 1: Disabled,	－	0	Enabled	●/●	●/●	－/●	●	6.13.5
			2: Enabled (Forced quick deceleration)
	0306	Base frequency voltage #1	0.0～600.0 [V]	0.1/0.1	See J-28	Enabled	●/●	●/●	－/●	●	6.13.6
		(output voltage adjustment)