3 Press and hold the number button (in this example, 1) for more than 2 seconds.
The display pattern automatically changes to the small animation display (see page 14).
Tuning in to a preset station
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 12 and 13.
Selecting a preset station directly
1 Select the band (FM1 – 3, AM).
Each time you press the button,
the band changes as follows:
ENGLISH
After about 5 seconds
Preset number appears.
4 Repeat the above procedure to store other stations into other preset numbers.
Notes:
•A previously preset station is erased when a new station is stored in the same preset number.
•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
FM1 
FM2 
FM3 
AM
2 Select the number (1 – 6) for the preset station you want.
Note:
You can also use the 5(up) or ∞(down) button on the unit to select the next or previous preset stations. Each time you press the 5(up) or ∞(down) button, the next or previous preset station is tuned in.
CONTINUED ON THE NEXT PAGE
13
