TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

 

 

 

Symptoms

Causes

Remedies

 

 

 

 

 

 

 

 

Sound cannot be heard

The volume level is set to the

Adjust it to the optimum level.

 

 

 

 

 

from the speakers.

minimum level.

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and connections.

General

 

 

 

 

 

 

This unit does not work

The built-in microcomputer may

Press the reset button on the

 

 

at all.

have functioned incorrectly due

control panel. (The clock setting

 

 

 

to noise, etc.

and preset stations stored in

 

 

 

 

memory are erased.)

 

 

 

 

 

 

 

 

 

 

(See page 2.)

 

 

 

 

 

 

 

 

“Panel Connect Error”

The control panel is not attach

Remove the control panel, wipe

 

 

 

appears on the display.

correctly and firmly.

the connectors, then attach it

 

 

 

 

 

again. (See page 45.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SSM (Strong-station

Signals are too weak.

Store stations manually.

 

 

FM/AM

 

 

Sequential Memory)

 

 

 

 

 

 

automatic preset does

 

 

 

 

 

 

not work.

 

 

 

 

 

 

 

 

 

 

 

 

Static noise while

The antenna is not connected

Connect the antenna firmly.

 

 

 

 

 

listening to the radio.

firmly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc cannot be played

Disc is inserted upside down.

Insert the disc correctly.

 

 

 

 

back.

 

 

 

 

 

 

 

 

 

 

 

 

CD-R/CD-RW cannot be

CD-R/CD-RW is not finalized.

• Insert a finalized CD-R/CD-RW.

 

 

 

played back.

 

• Finalize the CD-R/CD-RW

 

 

• Tracks on the CD-R/

 

with the component which

 

 

 

CD-RW cannot be

 

you used for recording.

 

 

 

skipped.

 

 

 

 

 

 

 

 

 

 

 

 

Disc cannot be ejected.

Disc is locked.

Unlock the disc. (See page 22.)

Playback

 

 

 

 

 

 

 

 

Disc cannot be

The CD player may function

While pressing

 

 

 

 

 

 

recognized (“No Disc,”

incorrectly.

(standby/on attenuator), press

 

 

“Loading Error,” or “Eject

 

and hold 0 (eject) for more than

 

 

Error” flashes on the

 

2 seconds to eject the disc.

Disc

 

 

 

 

 

display.)

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc sound is sometimes

You are driving on rough roads.

Stop playback while driving on

 

 

 

interrupted.

 

rough roads.

 

 

 

 

 

 

 

 

 

 

Disc is scratched.

Change the disc.

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and connections.

 

 

 

 

 

 

 

 

“No Disc” flashes on the

No disc in the loading slot.

Insert a disc into the loading slot.

 

 

 

display.

 

 

 

 

 

 

 

Disc is inserted incorrectly.

Insert the disc correctly.

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH

53

Page 53
Image 53
JVC KD-LH300, KD-AR3000 manual Troubleshooting, Symptoms Causes Remedies, General, Playback, Disc