Storing your own sound modes
You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2, and USER 3).
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Press SEL (select) once.
The last selected sound mode is called up.
The
Ex.: If you have selected “Country” previously
2 Select the sound mode you want to adjust.
•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).
3 Enter the sound adjustment mode.
The following sound
mode adjustment screen appears on the display.
4 Make adjustments as you like.
1)Press ¢ 
or 4 
to select the frequency
2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of
3)Repeat steps 1) and 2) to adjust the other frequency bands.
5 Store the adjustment you made.
The confirmation message
If you want to cancel the adjustments,
press D DISP.
6 Select one of the user sound modes (USER 1, USER 2, or USER 3) you want to store into.
Ex.: When you select “User 1”
ENGLISH
27
