Toshiba VF-A7 instruction manual Others, , ,  ⇔

5)Others

: RX2

: Control panel parameter(Refer to 3.3.4 for details.)  : Binary/BCD input

 : Communication common serial option

 : Communication RS485(Refer to 6.3.2 for details.)

 : Communication add-on option

[Setting procedure: Setting the parameter  at  for current signal(4 to 20mAdc)]

Key operated	LED display	Operation
		The operation frequency is displayed. (Make this setting when the
		motor is out of operation.)(If the monitor display mode setting
		parameter  is set at  [Running frequency])
MON		Press the [MON] key to call up the first basic parameter 
		(Automatic acceleration/deceleration).
▲ ▼		Select  by pressing the △ or ▽ key.
ENT		Press the Enter key to display the first parameter .
▲		Select  by pressing the △ key.
ENT		Press the Enter key to display the parameter setting.
▼		Select  (VI/II signal input) by pressing the ▽ key.
ENT	⇔	Press the Enter key to save the change. Then,  and the
		set value are displayed alternately.

C-13