Toshiba VF-A7 instruction manual Searching for a parameter and changing its setting

■Searching for a parameter and changing its setting

Follow the procedure below to search for parameters and change their settings.

Key operated		LED display	Operation
			The operation frequency is displayed. (Make this setting
			when the motor is out of operation.)(If the monitor display
			mode setting parameter  is set at [Running
			frequency])
MON			Press the MON key to call up the first basic parameter
			 (Automatic acceleration/deceleration).
▲	▼		Select the user group parameter  by pressing the
			△ or ▽ key.
ENT			Press the Enter key to enter the user parameter search
			and change mode.
ENT			The inverter searches for and displays parameters the
			settings of which are different from their respective
OR			default settings. Press the Enter key or△ key to switch
▲	▼		parameters displayed. (Press the▽key to search for
			parameters in reverse direction.)
ENT			Press the [MON] key to display the parameter setting
			(set value).
▲	▼		Change the parameter setting by pressing △ or ▽
			key.
			Press the enter key to save the change. Then, the
ENT		⇔	parameter code and the set value are displayed
			alternately.
			Following the same steps as above, search for and
▲ (	▼ )		display other parameters you want to change, one by
		()	one, by pressing the △ or ▽ key, to check or change
			their settings.
▲ (	▼ )		 is displayed again after completion of a
			search for all changed parameters.
MON		Parameter display	To cancel the parameter search in process, press the
		↓	Monitor key. Press the Monitor key once during search
			to return to parameter setting mode. Then, press the
MON		↓	Monitor key to return to status monitor mode or normal
			monitor mode (operation frequency display mode).

If you feel puzzled about what to do next during this operation, press the Monitor key several times to return to the step  and follow the above steps all over again.

D-6