Toshiba VF-A7 Changing status monitor function, Changing indication of status with power on

8. 2 Changing status monitor function

■Changing indication of status with power on

The standard monitor mode (*1) indicates running frequency (with default setting) such as

"" when power is on or "" when power is off, however, such the standard indication can be changed into arbitrary indication as shown on page H-5. When the standard monitor indication is changed for an option, each indication appears lacking in the initial letter (, , etc.).

・Standard monitor mode ⇒ Standard monitor indication selection（）

Title	Function	Adjustment range	Default setting
	Monitor display mode setting	～(Refer to the next page.)	

■Changing contents of status monitor indication

Regarding contents of status monitor indications appearing in the left column of the table on page H-1, those marked with *2 to *5 can be changed for others. Select a desirable monitor function from among optional monitor functions appearing on page H-5.

*2	Frequency command ⇒ Changeable by status monitor #1 display mode ().
*3	Load current		⇒ Changeable by status monitor #2 display mode ().
*4	Input voltage		⇒ Changeable by status monitor #3 display mode ().
*5	Output voltage		⇒ Changeable by status monitor #4 display mode ().
	Title		Function	Adjustment range	Default setting
		Status monitor #1 display mode		～	
				(Refer to the next page.)
		Status monitor #2 display mode		～(ditto)	
		Status monitor #3 display mode		～(ditto)	
		Status monitor #4 display mode		～(ditto)	

※If  to  are set at "" (Running frequency) the running frequency is not held in trip status.

H-4