Toshiba VF-A7 instruction manual Selection table of separate-type options

Selection table of separate-type options

Voltage	Applicable	Inverter	Input AC	DC reactor	Radio noise reduction filter
					High		Core
	motor		reactor			Simple
class	[kW]	model	(ACL)	(DCL)	attenuation	type	type
					type		(*1)

	Motor end	Motor
Braking resistor	surge voltage	noise
(*2, 3, 4)	suppression	reduction
	filter	filter

0.4	VFA7-2004PL	PFL-2005S	DCL-2007
0.75	VFA7-2007PL
			(*9)
1.5	VFA7-2015PL	PFL-2011S	DCL-2022		－
2.2	VFA7-2022PL			－	－

3.7VFA7-2037PL PFL-2018S DCL-2037

	5.5	VFA7-2055PL	PFL-2025S DCL-2055					PBR3-2055
	7.5	VFA7-2075PL	PFL-2050S	DCL-2110			RC9129	PBR3-2075		－
	11	VFA7-2110P			NF-3050A-MJ			PBR3-2110
200V	15	VFA7-2150P	PFL-2100S	DCL-2220	NF-3080A-MJ			PBR3-2150	－
	18.5	VFA7-2185P
class
	22	VFA7-2220P			NF-3100A-MJ			PBR3-2220
	30	VFA7-2300P	PFL-2150S	DCL-2370 NF-3150A-MJ
	37	VFA7-2370P1				RCL-M2
	45	VFA7-2450P1	PFL-2200S DCL-2450		NF-3200A-MJ			PBR-222W002
	55	VFA7-2550P1	PFL-2300S DCL-2550		NF-3250A-MJ					NRL-2220
	75	VFA7-2750P1	PFL-2400S	DCL-2750	NF-3200A-MJ		RC9129	DGP600W-B1		NRL-2300
					×2 (parallel)	(*5)
	90	VFA7-2900P1	PFL-2600S	DCL-2900	NF-3250A-MJ			[DGP600W-C1]		NRL-2400
					×2 (parallel)
	0.75	VFA7-4007PL		DCL-2007					MSF-4015Z
	1.5	VFA7-4015PL	PFL-4012S	(*7) (*9)				－
	2.2	VFA7-4022PL		DCL-2022					MSF-4037Z
	3.7	VFA7-4037PL		(*7)	－	－
	5.5	VFA7-4055PL						PBR3-4055	MSF-4075Z
	7.5	VFA7-4075PL	PFL-4025S	DCL-4110				PBR3-4075
	11	VFA7-4110PL					RC9129	PBR3-4110	MSF-4150Z	－
	15	VFA7-4150PL						PBR3-4150
	18.5	VFA7-4185P	PFL-4050S	DCL-4220	NF-3040C-MJ				MSF-4220Z
	22	VFA7-4220P			NF-3050C-MJ			PBR3-4220
400V	30	VFA7-4300P			NF-3060C-MJ				MSF-4370Z
	37	VFA7-4370P1	PFL-4100S	DCL-4450	NF-3080C-MJ
class
	45	VFA7-4450P1			NF-3100C-MJ			PBR-417W008	MSF-4550Z
	55	VFA7-4550P1	PFL-4150S DCL-4750		NF-3150C-MJ
	75	VFA7-4750P1							MSF-4750Z NRL-4155
	90/110	VFA7-4110KP1 PFL-4300S DCL-4110K			NF-3250C-MJ	RCL-M4				NRL-4230
	132	VFA7-4132KP1			NF-3200C-MJ			DGP600W-B2		NRL-4300
					×2 (parallel)
			PFL-4400S DCL-4160K				RC9129	[DGP600W-C2]
	160	VFA7-4160KP1			NF-3200C-MJ					NRL-4350
					×2 (parallel)	(*5)			(*6)
	220	VFA7-4220KP1 PFL-4600S DCL-4220K			NF-3250C-MJ			DGP600W-B3		NRL-4600
					×2 (parallel)			[DGP600W-C3]
	280	VFA7-4280KP1 PFL-4800S DCL-4280K			NF-3250C-MJ			DGP600W-B4		NRL-4550
					×3 (parallel)			[DGP600W-C4]

(*1): This filter needs to be wound 4 turns or more around with the input side power line. This filter can be used for the output side in the same manner. For the wire whose size is 22 mm2 or more, install at least 4 filters in series. Round type (Model: RC5078) is also available.

(*2): PBR3-□□□□ indicates braking resistor.

(*3): Model in square brackets is fitted with top cover.

(*4): To use 200 V-75 kW or more or 400 V-110 kW or more inverter with an external braking resistor (DGP600 series), installation of a dynamic braking drive circuit inside the inverter is required.

(*5): There is a case that this filter is unusable depending on the type or size of the cable to be used.

(*6): About this filter for inverter models of 90 kW or more, consult with our office

(*7): These reactors are usable for each of 200V class and 400V class.

(*8): Be sure to connect DC reactor to 200V-75kW or more or 400V-110kW or more inverter. (Not necessary for DC input.)

(*9): When connecting DCL-2007 to VFA7-2004PL, 2007PL, 4007PL and 4015PL, the terminal of DCL-2007 is processed so that the screw size of inverter’s main circuit terminal may be suited.

I-9