Toshiba VF-A7 instruction manual Putting out signals of arbitrary frequencies, ・Function, P24-OUT2

6.1.2 Putting out signals of arbitrary frequencies

 ：Speed reach setting frequency

 ：Speed reach detection band

・Function

When the output frequency enters the frequency range delimited by the frequencies set arbitrarily with the parameters  and ( (-set frequency) +/- (-set frequency) ), an ON or OFF signal is put out.

■Setting of reach frequency and detection frequency band

Title	Function	Adjustment range
	Speed reach setting frequency	～
	Speed reach detection band	～

Default setting





■Setting of output terminal parameter

Title	Function	Adjustment range			Set value
	Output terminal		: Specified		speed	arrival(a-contact)
		～			or
	selection #2 (OUT2)		:	Specified		arrival(b-contact)
					speed

Note) To put out signals to OUT 1, select the parameter .

1) If detection frequency band + Speed reach setting frequency < Reference frequency

Output frequency [Hz]

 ＋    － 

0

Speed reach setting frequency(Default setting)

P24-OUT2

(Speed reach setting frequency：Inverse

P24-OUT2

[s]

ON

OFF ONOFF )

2) If detection frequency band + speed reach frequency > reference frequency

Output frequency [Hz]  ＋    － 

0

Speed reach setting frequency(Default setting)

P24-OUT2

(Speed reach setting frequency：Inverse

P24-OUT2

[s]

ON

OFF ONOFF )

F-2