Toshiba VF-A7 Operation from the control panel ［Control panel operation］, ：Start the motor

3.2.2 Operation from the control panel ［Control panel operation］

This section describes how to start/stop the motor, and set the operation frequency with the operating panel.

▲▼ ：Set the operation freq.

ＲＵＮ	：Start the motor
ＳＴＯＰ	：Stop the motor.
	(Deceleration stop)

★For coast stop

Change the setting of the parameter
.	Coast stop
Motor speed

★The operation frequency can be changed anytime even during operation.)

Ex. of	typical connection
	MCCB			Motor
Power	R/L1	U/T1		IM
	S/L2	V/T2
supply	T/L3	W/T3
			F
			ST	Shipped
	Control panel
			R	with these
				terminals
			CC	shorted
	G/E
			I I
	CC RX	VI RR PP

■Change the settings of the following two parameters first from the operating panel.

：（Control panel: Parameter determining the operation mode）

：（Control panel: Parameter determining the input mode of speed reference）

[Setting		procedure]
	Key operated		LED display	Operation
				The running frequency is displayed. (Make this setting when the
				motor is out of operation.)(If the monitor display mode setting
				parameter  is set at  [Running frequency].)
	MON			Press the [MON] key to call up the first basic parameter 
				(automatic acceleration/deceleration).
	▲	▼		Select “” by pressing the △ or ▽ key.
	ENT			Press the Enter key to display the parameter setting.
				(Default setting: )
	▲	▼		Change the parameter setting to  (Operating panel enabled)
				by pressing the △ key.
	ENT		⇔	Save the change by pressing Enter key. Then, and the
				set value are displayed alternately.
	▲	▼		Select “” by pressing △ key or ▽ key.
	ENT			Press the Enter key to display the parameter setting.
				(Default setting: ).
	▲	▼		Change the parameter setting to  (Operating panel input). by
				pressing the △ key.
	ENT		⇔	Press the Enter key to save the change. Then,  and the
				set value are displayed alternately.

＊To return to the standard monitor mode (operation frequency), press MON key.

C-6