To change the transmittable signals for operating another manufacturer’s VCR
1.Press and hold VCR 
.
2.Press VCR.
3.Enter manufacturer’s code using buttons
and 0.
See the list to the right to find the code.
4. Release VCR 
.
The following button can be used for operating the VCR:
VCR 
: Turns on and off the VCR.
After pressing VCR, you can perform the following operations on the VCR:
CH | Changes the TV channels on the VCR. |
1 – 10, 0, 100+ (+10): Selects the TV channels. | |
| The 10 button will function as the |
| ENTER button if your VCR requires |
| pressing ENTER after selecting a |
PLAY3: | channel number. |
Starts playback. | |
REW: | Rewinds a video tape. |
FF: | Fast winds a video tape. |
STOP7: | Stops operation. |
PAUSE8: | Pauses. |
REC PAUSE: | Starts recording or enters recording pause. |
Note:
Refer to the manual supplied with your VCR.
5. Try to operate your VCR by pressing VCR 
.
When your VCR turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
Manufacturer | Codes |
JVC | 00, 26, 27, 28, 29, 58 |
AIWA | 01, 02 |
BELL & HOWELL | 03 |
BLAUPUNKT | 04, 05 |
CGM | 06, 07 |
EMERSON | 08, 10, 11, 12, 64, 65 |
FISHER | 03, 14, 15, 16, 17 |
FUNAI | 01 |
GE | 18, 19, 20 |
GOLDSTAR | 07 |
GOODMANS | 13, 21 |
GRUNDIG | 06, 22 |
HITACHI | 18, 23, 24, 25, 66 |
LOEWE | 07, 21 |
MAGNAVOX | 04, 19, 24 |
MITSUBISHI | 30, 31, 32, 33, 34, 35 |
NEC | 26, 27 |
NOKIA | 03, 36 |
NORDMENDE | 38 |
ORION | 09 |
PANASONIC | 19, 24, 39, 40 |
PHILIPS | 04, 19, 21, 24, 41, 42 |
PHONOLA | 21 |
RCA/PROSCAN | 04, 18, 19, 23, 24, 43, 44, |
| 45 |
SABA | 38, 46 |
SAMSUNG | 45, 47, 59, 61, 62, 63 |
SANYO | 03, 48, 49 |
SHARP | 37, 50 |
SIEMENS | 03, 51 |
SONY | 52, 53, 54 |
TELEFUNKEN | 55, 60 |
TOSHIBA | 43, 44 |
ZENITH | 56, 57 |
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
37
