Dell T310 owner manual 2. LCD Status Messages continued

Table 1-2. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1414	CPU # temp	Processor is out	Ensure that the processor
	exceeding	of acceptable	heat sink is properly
	range. Check	temperature range.	installed. See
	CPU heatsink.		"Troubleshooting the
			Processor" on page 163 and
			"Troubleshooting System
			Cooling Problems" on
			page 154.
E1418	CPU # not	Processor is missing or bad,	Ensure that the processor is
	detected.	and the system is in	properly installed.
	Check CPU is	an unsupported	See "Troubleshooting the
	seated	configuration.	Processor" on page 163.
	properly.
E141C	Unsupported	Processor is in an	Ensure that your processor
	CPU configur- unsupported		matches and conforms to
	ation. Check	configuration.	the type described in the
	CPU or BIOS		processor technical
	revision.		specifications outlined in
			your system’s Getting
			Started Guide.

E141F CPU #	The system BIOS has
protocol	reported a processor
error. Power	protocol error.
cycle AC.

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Getting Help" on page 177.

E1420 CPU Bus	The system BIOS has
parity error.	reported a processor
Power cycle	bus parity error.
AC.

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Getting Help" on page 177.

About Your System

29