Dell T310 Removing the Expansion Card Stabilizer, Installing the Expansion Card Stabilizer

7Place the system upright on a flat surface.

8Reattach any peripherals and connect the system to an electrical outlet.

9Turn on the system and attached peripherals.

Expansion Card Stabilizer

Removing the Expansion Card Stabilizer

1Turn off the system and attached peripherals. Disconnect the system from the electrical outlet and peripherals.

2Open the system. See "Opening the System" on page 85.

3While pressing inwards on the touch points of the expansion card stabilizer, lift it away from the system. See Figure 3-6.

Installing the Expansion Card Stabilizer

1Align the expansion card stabilizer with the slots on the chassis and the cooling shroud.

2Hold the touch points and lower the expansion card stabilizer. See Figure 3-6.

3Close the system. See "Closing the System" on page 86.

4Place the system upright on a flat surface.

5Reattach any peripherals and connect the system to an electrical outlet.

6Turn on the system and attached peripherals.

Installing System Components

87