Dell T310 owner manual Viewing Status Messages, Removing LCD Status Messages

Viewing Status Messages

If a system error occurs, the LCD screen will turn amber. Press the Select button to view the list of errors or status messages. Use the left and right buttons to highlight an error number, and press Select to view the error.

Removing LCD Status Messages

For faults associated with sensors, such as temperature, voltage, fans, and so on, the LCD message is automatically removed when that sensor returns to a normal state. For other faults, you must take action to remove the message from the display:

•Clear the SEL — You can perform this task remotely, but you will lose the event history for the system.

•Power cycle — Turn off the system and disconnect it from the electrical outlet; wait for approximately ten seconds, reconnect the power cable, and restart the system.

NOTE: The following LCD status messages are displayed in the Simple format.

Table 1-2. LCD Status Messages

Code	Text	Causes	Corrective Actions
E1000	Failsafe	Check the system event log	Remove AC power to the
	voltage	for critical failure events.	system for 10 seconds and
	error.		restart the system.
	Contact		If the problem persists,
	support.
			see "Getting Help" on
			page 177.
E1114	Ambient Temp	Ambient temperature has	See "Troubleshooting
	exceeds	reached a point outside of	System Cooling Problems"
	allowed	the allowed range.	on page 154.
	range.

26

About Your System