Dell T310 owner manual Removing an iDRAC6 Express Card Optional, iDRAC6 Express card connector

Figure 3-19. Installing or Removing an iDRAC6 Express Card (Optional)

2

	1
				3
			5	4
1	clip	2	iDRAC6 Express card
3	retention standoff tab clip	4	iDRAC6 Express card connector
5	notch

6Close the system. See "Closing the System" on page 86.

7Place the system upright on a flat, stable surface.

8Reattach any peripherals and connect the system to an electrical outlet.

9Turn on the system and attached peripherals.

Removing an iDRAC6 Express Card (Optional)

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 85.

120

Installing System Components