Dell T310 owner manual Slide the hard drive out until it is free of the drive bay

4Open the hard-drive carrier release handle to release the drive. See Figure 3-8.

5Slide the hard drive out until it is free of the drive bay.

6Remove the hard drive from the carrier. See "Removing a Hot-Swap Hard Drive From a Hard-Drive Carrier" on page 94.

7Insert a drive blank in the vacated drive bay. See "Installing a Hard-Drive Blank" on page 91.

8Replace the front bezel. See "Installing the Front Bezel" on page 82.

CAUTION: To maintain proper system cooling, all empty hard-drive bays must have drive blanks installed.

Figure 3-8. Removing or Installing a Hot-Swap Hard Drive

1

			3
	2
1	release button	2	hard-drive carrier handle
3	hard-drive carrier

92

Installing System Components