Dell T310 owner manual hard-drive bracket

Figure 3-10. Removing or Installing a Cabled Hard Drive

1

2

3

4

1	power/data cable	2	tabs (2)
3	hard drive	4	hard-drive bracket

5Detach the hard-drive bracket from the hard drive by pushing out at the edges of the bracket and removing the hard drive.

NOTE: If you are not replacing the hard drive, remove the drive from the drive bracket (see Figure 3-11) and insert the empty bracket back into the drive bay.

6Replace the system cover. See "Closing the System" on page 86.

7Place the system upright on a flat surface.

8Reattach any peripherals and connect the system to an electrical outlet.

9Turn on the system and attached peripherals.

96

Installing System Components