Dell T310 owner manual Installing the Chassis Intrusion Switch, chassis intrusion switch cable

Figure 3-26. Removing and Installing the Chassis Intrusion Switch

1

2

3

1 chassis intrusion switch 2 chassis intrusion switch cable

3intrusion connector on the system board

Installing the Chassis Intrusion Switch

1Align the chassis intrusion switch with the securing bracket notch. See Figure 3-26.

2Slide the switch into the securing bracket notch. See Figure 3-26.

3Connect the chassis intrusion switch cable to the connector on the system board.

4Close the system. See "Closing the System" on page 86.

5Place the system upright on a flat surface.

6Reattach any peripherals and connect the system to an electrical outlet.

7Turn on the system and attached peripherals.

Installing System Components

135