Dell T310 owner manual LCD Status Messages

Table 1-1. Diagnostic Indicator Codes (continued)

Code	Causes	Corrective Action
	No memory modules	See "Troubleshooting System
	detected.	Memory" on page 155.
	System board failure.	See "Getting Help" on page 177.
	Memory configuration	See "Troubleshooting System
	error.	Memory" on page 155.
	Possible system board	See "Getting Help" on page 177.
	resource and/or system
	board hardware failure.
	Possible system resource	See "Getting Help" on page 177.
	configuration error.
	Other failure.	Ensure that the diskette drive,
		optical drive, and hard drives are
		properly connected. See
		"Troubleshooting Your System" on
		page 147 for the appropriate drive
		installed in your system. If the
		problem persists, see "Getting
		Help" on page 177.

LCD Status Messages

The LCD messages consist of brief text messages that refer to events recorded in the System Event Log (SEL). For information on the SEL and configuring system management settings, see the systems management software documentation.

NOTE: If your system fails to boot, press the System ID button for at least five seconds until an error code appears on the LCD. Record the code, then see "Getting Help" on page 177.

About Your System

25