Dell T310 owner manual Installing the Cooling Shroud

Figure 3-6. Removing and Installing the Cooling Shroud

1

2

3

	5
	4
1	cooling shroud	2	expansion card stabilizer
3	expansion card stabilizer touch	4	cable bracket
	points (2)
5	cooling shroud touch point

Installing the Cooling Shroud

1Carefully lower the cooling shroud into the system holding by the touch point.

2Ensure that no cables are pinned under the edges of the cooling shroud.

3Secure the cable into the bracket on the side of the cooling shroud.

4Replace the expansion card stabilizer. See "Installing the Expansion Card Stabilizer" on page 87.

5Close the system. See "Closing the System" on page 86.

Installing System Components

89