Out of manufacturing mode, The processor speed may be

Table 1-3. System Messages (continued)

Caution!

NVRAM_CLR jumper is installed on system board

NVRAM_CLR jumper is installed in the clear setting. CMOS has been cleared.

Move the NVRAM_CLR jumper to the default position (pins 3 and 5). See Figure 6-1 for jumper location. Restart the system and re-enter

the BIOS settings. See "Using the System Setup Program and UEFI Boot Manager" on page 57.

CPU set	to	The processor speed may be	If not an intentional setting,
minimum		intentionally set lower for	check any other system
frequency.		power conservation.	messages for possible causes.

CPU x installed		Memory modules are	Install memory modules for
with no	memory.	required but not installed in	the processor. See
		the indicated processor’s	"Expansion Cards" on
		memory slots.	page 114.

About Your System

Dell T310 out of manufacturing mode, The processor speed may be, Install memory modules for