Kentrox AI232 Displays the number of frame length violations, Received packets, Had CRC errors

AI232 Version 9.6x User’s Guide

AI232 Commands: diag-info

This example displays diagnostic information for the front panel Ethernet interface, which is accessed by typing E.

		ETHERNET 0
Rx LG frame length violation:		---0
Rx NO nonoctet aligned frame:		---0
Rx SH short frame (runt):	-------	0
Rx CR CRC error: ----------------		0
Rx OV overrun: ------------------		0
Rx CL collision: ----------------		0
Rx BSY buffers exhausted:	-------	0
Rx frames missed: ---------------		0
Rx frames received: -------------		0
Rx bytes received: --------------		0
Tx RL retry limit exceeded: -----		0
Tx RC collisions: ---------------		0
Tx UN underruns: ----------------		0
Tx LC late collisions:-----------		0
Tx CSL carrier sense lost:	------	2451095
Tx queued buffers: --------------		0
Tx frames sent: -----------------		2451095
Tx bytes sent: ------------------		233814304
Unexpected interrupts: ----------		0
Enter M-emory, A-sync, E-thernet, T-cp or Q-uit:
Display Item	Description
Rx LG frame length violation	Displays the number of frame length violations in
	received packets.
Rx NO nonoctet aligned frame	Displays the number of misaligned, received frames.
Rx SH short frame (runt)	Displays the number of short received frames.
Rx CR CRC error	Displays the number of packets received that have
	had CRC errors.
Rx OV overrun	Displays the number of packets not received by the
	interface because of a receiver overrun.
Rx CL collision	Displays the transmit collisions on received frames.
	This is the number of times the Ethernet device goes
	to transmit but cannot because someone else is
	already transmitting.
Rx BSY buffers exhausted	Displays the number of times all receive buffers
	were used, but more were required.
Rx frames missed	Displays the number of frames that were supposed
	to be received, but were missed.

8-47