Ip init, Formats | Kentrox AI232 guide

AI232 Version 9.6x User’s Guide

AI232 Commands: ip init

ip init

Note: This command is only valid when AI232 is in standalone mode.

Description

This command configures the following settings for AI232 in standalone mode:

zIP address

zSubnet mask

zHigh IP address

zPrimary gateway address

zBackup gateway address

zIP address range

CAUTION: The following message appears when the “ip init” command is invoked and no login ports are configured:

There are no login ports currently configured for this system. Please take necessary precautions to prevent lockout.

Command Type

shell

Formats

ip init

Examples

This example displays the prompt that appears when ip init is entered. A prompt appears for each configurable IP address item.

[232] ip init

Enter IP Address (xxx.xxx.xxx.xxx):

8-62

Image 234

Kentrox AI232 manual Ip init, Formats

Contents

AI232 Port High Speed Asynchronous Line Card User’s Guide Page About this Document Document Conventions Tip Laser Danger Electrostatic Discharge Caution Ground Caution Proper Cooling Caution FCC Warning Email Support Customer AssistanceWeb Site Support Phone Support Table of Contents System Configuration Link Configuration Diagnostics for TID Multiplexing TID Multiplexing TOC-5 AI232 Commands AI232 Menu Aliases FTP Sessions Appendix a AI232 Crash Codes Product Description Features Standalone Configuration System Diagnostics AI232 Hardware Components Ports 9-16 Connector Ports 25-32 ConnectorPorts 17-24 Connector Ports 1-8 Connector Technical Specifications Component Description Distribution Panels Specifications for DP232-19/23Description Specification Model DP232-19/23 Pin Assignments Signal DCD Connect to the AI232 Installation ProcedureModel DP232-RJ45 Ports Places Specifications for DP232-RJ45 Pin Signal Install the mounting flanges in the desired location Parts ListDescription Quantity Cable CAB467 Places DP232-RJ45 Typical Applications Asynchronous to TCP/IP Application Modem Multiplexer Application Illustrates a modem multiplexer application Using the AI198 Menu System Accessing the Menu System Types of Menu Items Navigating the Menu SystemMenu Numbering Structure Submenus Toggles DataMenu re-appears with the entered IP address Functions Menu Item DescriptionsMenu Item Description Exiting the Menu System AI232 Local Menu System TACACS+ Authentication Multilevel User Name and Password SecurityRadius Authentication Identifying AI232 Menu System Security Options PPP Authentication Protocols PAP and Chap Using a Telnet Connection for Login Logging Into AI232 Using an Asynchronous Port for Login Consecutive failed login attempts Number of consecutive failed login attempts Accessing the Local Menu System Data Entry Items Navigating the Local Menu SystemIdentifying Types of Menu Items Direction Keys Toggle Items Accessing the Help Menu Send Exiting the Local Menu System Save the changes AI232 Version 9.6x User’s Guide System Configuration Description General System Properties ConfigurationDestination Menu Break Sequence Format Configuration in the AI198 Menu System Menu Item Type Ethernet Port Settings Configuration in the AI232 Local Menu SystemToggle for both menu items FTP Port This menu item sets the FTP server port number IP Settings This example displays 16 FTP port number set to Menu Item Types Access the System Menu System PromptThis item sets the system prompt value in the CLI TCP Settings ToggleTo on Telnet Port This item sets the Telnet port value for AI232 This example displays Telnet Port set to Radius Configuration Server Settings Enabled To configure the shell/FTP Radius option Access Menu FALLBACK. The default is DisabledShell/FTP Options Enabled TACACS+ Configuration Shell/FTP Options 00049 Snmp Configuration Authentication TrapsAI232 Local Menu Item Configuration Community Names Data for all menu items Following example displays WriteComm Menu Contact Persons Node Information Snmp Manager 10.65.32.4 Static Route Configuration IP Address Settings TID to Modem Mux Configuration Inactivity TimeoutFollowing are available This example displays Inactivity Timeout set to Initialization String Port Bit Settings This example displays Init String set to conn23Toggle for all menu items TID to Route AI232 Local Menu Item Configuration Time Configuration Daylight Savings Time Sntp Settings SettingsAccess the Time Menu located under the System Menu Time Zone This following example displays AI232 Version 9.6x User’s Guide Link Configuration Asynchronous AI232 has 3 configurable link typesAI232 Link Types Asynchronous PPP Modem Multiplexer Alias Connect Options ConfigurationAccess Menu For 02 Alias, enter 2, and the alias name Link Type Availability Call Retry Interval This example displays 02 Alias set to async.4.1 Connect String This example displays 03 Call retry interval set to 00134 Default is OFF Connection SettingsConnection settings are configured using three menu items Is on 00030 Link Application Login Disconnect Options Configuration Disconnect Inactivity Timer SettingsDisconnect inactivity timer when the link receives a call Select on or OFF. The default is on This example displays Off. The default is On This example displaysIs Off Disconnect Settings Disconnect settings are configured using two menu itemsDefault is on Disconnect String Disconnect General Link Properties Configuration Auto Disable Error LimitAsync, AsyncPPP, and ModMux Flow Control This example displays SW Flow Control set to XonXoff Access the Link MenuLink Description This menu item defines a description for a link Link Number This menu item enables or disables a link Link StateThis example displays 01 Link number set to This example displays Link state set to Disabled Link Type Port Data Bits Async and AsyncPPP Port Parity This example displays Port data bits set to Seven This menu item defines the baud rate for a port Port SpeedThis example displays Port parity set to Odd Data in the AI232 local menu system Menu 4.2.14.12.5 appears Port Stop Bits Xon Repeat Interval This example displays 10 Xon Repeat interval set to Following menu items are available for PPP configuration General PPP Properties ConfigurationIpcp Address Settings AsyncPPP and ModMux Ipcp Address Parameters Maximum Unit Settings Set to Network Control Protocol For an Ipcp network control protocol Ipcp Modem Option Configuration Modem String Dialing Time-out Interval Number of Dial Attempts This example displays Dialing time-outset to Modem Setup Menu This example displays Number of dial attempts set to PPP Authentication Configuration Local Authentication Settings PAP RAS Option This example displays RAS Option set to RADIUS/Fallback Remote Authentication Settings Chap RTS/DTR Lead Control Configuration DTR State Configuration RTS State Configuration Flow Control DTR connect state Off DTR disconnect state TID Multiplexing Overview AI232 Version 9.6x User’s Guide TID Multiplexing Configuration Configuring the Parent AliasMenu appears Values are 1 to Destination Configuring the Children Aliases TidforAI232 Defines the terminal identifier for AI232 During the parent alias configuration TIDtid Example Configurations For Alias name, enterSecond child connection YES Alias Edit Menu Alias Name 172.16.30.61#6001 PARENT1.1 Alias Edit Menu Alias Name Normal Response Format TID Multiplexing TroubleshootingParameters Response Item Description Error Response Format Normal Response Example Diagnostics for TID Multiplexing Error Response ExampleErrcde AI232 Version 9.6x User’s Guide Alias and Call Routing Configuration AI232 Card B IP address DownstreamIncoming Outgoing Asynchronous TCP/IP CallCall Upstream AI232 Version 9.6x User’s Guide Configuring an Alias Configuring an Alias in the AI198 Menu SystemCall Routing AI232 Version 9.6x User’s Guide AI232 Version 9.6x User’s Guide Configuring an Alias in the AI232 Menu System For Display Alias in Destination Menu, select Yes or No Source/Destination Protocol Tables Source Destination Menu Item Information SourceMenu Item Information Async with TCP/IP Source Without Telnet Breaks AI198TCP/IP Source With Telnet Breaks AI198 Async break Telnet break Example asy.3 Asynchronous Source Without Breaks AI232Asynchronous Source With Breaks AI232 TCP/IP Source Without Telnet Breaks AI232 TCP/IP Source With Telnet Breaks AI232 Protocol Processing Modules Module Types Return followed by a line feed To zero, this option is turned off Specify up to 16 charactersCharacters. The packet module accepts only one -S parameter Feed and delete Provides TL1 packetizing and sets the packetizing timer toSeconds Provides TL1 packetizing and prevents breaks from passing Propagated upstream Echo 1 when the connection is initiated. Initiates will SGAProvides Telnet handling, but prevents breaks from being Echo and will SGA Start Symbols Alias MacrosAlias Macro Components Variables CommentsConstants Variable Value Wildcard Symbols OperatorsOperator Description Alias Macro Function Description of Operation Returns the entire string Match any of the expressions, then default isGreater than the length of string, the function Returns the length of string Alias Macro Configuration Configuration Examples =LA,PA,’#’,1-1=MYIP1 AI232 Version 9.6x User’s Guide AI232 Commands Shell Connections Commands OverviewShell Commands Establishing a Local Shell Connection Winslc Commands Displaying winslc Command LoggingEstablishing a Remote Shell Connection Using winslc Commands Log/Alarm Message HeaderHeader Element Description Specifies the message severity level Introduces the log/alarm messageSpecifies the current date Specifies the line card baseport number Aaa account Command TypeCommand Defaults Formats Aaa authen Enables TACACS+ authenticationDisables TACACS+ authentication Connections Aaa author Priv-lvl Aaa chpass Enabled TACACS+ fallback Aaa fallbackThis example displays the disabling of TACACS+ fallback Enables TACACS+ authentication with fallback Disables TACACS+ authenticationEnables TACACS+ authentication with no fallback Disabled all links Profile. Individual values are separated by commas , No associations configuredAaa profile Specifies the name of an existing profile Aaa profile 2 newprof1 Aaa retry Made. Valid values are 1 toConnection attempt Aaa stats Display Item Description Authorization instead of the TACACS+ server Displays the number of TACACS+ authorizationDisplays the number of failed TACACS+ authorization Where AI232’s system log was used for accounting Aaa summary Per-command based on per-command request/reply handling Displays the status of FTP access as AAA TACACS+Displays the TACACS+ authorization method for the AI232 Displays the TACACS+ accounting status of user login events Resets the timeout value to its default Aaa timeoutTACACS+ server when a connection attempt is made. Valid Values are 1 to Alarm Command Type shell Formats This example displays all system alarms in group links This example displays alarms for links 5-8in group links This example displays all alarms by severity level This example displays the unmasking of alarm group links Command Types Arp Column Description 172.16.30.117 Break 232break 10.40.5.11#1821 Breaking connection 10.40.5.11#1821 Reset error counters for links 1 CresetTo reset error counters for links 1, 2, Example, 1,2-3 to reset error counters for links 1, 2, Date Debug This example displays the enabling of all debug data logging Filename Defines the name of the file to delete This command deletes a specified file that resides on AI232Delete This example displays the deletion of file log.txt Diag-conn Pattern 1, Logic 2, and Pattern 3 are evaluated before This option prompts for the ID of the connection to viewDisplays details for that connection Logic 4 and Pattern 5 are considered Using Interpretation Mode Diag-eth Using the Help Option Deletes a filter Following formats apply to filtersAdds a filter Defines the source address MAC, IP, or TCP/UDP Adds or deletes a specific protocol filter. Available MAC/IP address settingsDefines the TCP/UDP port number regardless Protocol filters are This example displays Ethernet diagnostic help information Ijkl FF FC This example displays the deletion of filter protocol tcp This example displays the deletion of all filters Diag-info Displays the number of free or available Streams resources Last resetDisplays the name of the Streams resource Display Displays the state of the driver. Two states are available Connection to be enabledDisplays the link number Specifies that the link is not established Received packets Had CRC errorsDisplays the number of frame length violations Displays the number of short received frames Displays the number of bytes received on Displays the number of frames received onConnection Displays the number of times transmitted frames Displays the number of frames received on the connection Does not indicate an errorDisplays the number of transmit errors that have occurred Displays the number of bytes received on the connection Excessive deferral timer is exceeded. An excessive deferral ErrorsDisplays the number of alignment errors Error is recorded when the following events occur Following values may appear Ethernet interface needs to be resetDisplays the current state of the Ethernet interface. Ethernet interface is uninitialized Diag-line Option Function Diag-line Only present in data packets, then the data byte count is Displayed as Ascii String Diag-tconn Baseport Defines the baseport number for AI232 Dir This example displays all available files Exit This example displays an exit from the current shell session Head This command displays the first few lines of a fileDefines the number of lines to display. The default is Defines the name of the file to display This example displays a list of all available commands This example displays help information for command showHelp This command displays the current user name and profile Formats ExamplesThis example displays the current user name and profile This example displays the configured IP address information Ip init Enter IP Address Range default 1 Setting range to 232 Link Enables the serial linksDisables the serial links Restarts the serial links This example displays the starting of links 1 through 4 This example displays the stopping of links 6 This command turns the display of log messages on or off Log This command closes a shell session LogoutThis example displays the closing of a shell session This command displays a list of available files This command accesses the AI232 main menu system MenuThis example displays the AI232 Main Menu Modmux Displays the phone number that was dialed More 232more log.txt Winslc This command forces AI232 to crash dump and haltPanic Baseport Defines the AI232 baseport number This command changes an existing user’s password Passwd Ping Pppstatus Displays one of the following IP address of AI232 if the link status is Running Profile Adds write permission for a command that otherwise would Adds commands to a profile and optionally adds writeDefines the name of a command to associate with a user Deletes commands from a user profile Pvclist This example displays PVC information for link Column Description Reset This command resets AI232This example displays the resetting of AI232 Ipaddress Defines the IP address of the default router Router Usage Notes Selcnf Configuration fileSpecifies the option that deletes a configuration file Extension PDisplays the content of the file one page at a time Sholog Show Displays the version number of AI232 Displays the default and backup gateway IP addressDisplays the IP address, subnet mask, and high IP address Displays the date and time This command displays the status of the EIA leads StaeiaLead is negated DCD This example displays the current standalone mode status Standalone Staslc Displays the number of framing errors Is asserted and means the signal is negatedDisplays the number of parity errors Displays the number of overrun errors Syncflash Tacacs info Tacacs server Defines the server IP address Tacacs server ipSpecifies a server number or range of server numbers. Valid 0.0 Tacacs server phase Tacacs server phase 1-5,8 disable account Values are 1 through Tacacs server portDefines the TCP port number for the TACACS+ servers. Valid TCP port No secret configured Tacacs server secret Associated servers are enabled + or disabled Tacacs server summaryDisplays the server numbers. The +/ signs indicate if Displays the TACACS+ shared secrets passwords for specified Tacacs sholog This example displays a TACACS+ debug log file Tacacs stats Were received when AI232 attempted to read them from Displays the number of errors that occurred when AI232When AI232 attempted to read a packet from the TACACS+ Server that had a sequence number that was out of order Specifies that a line number value will be entered This command displays the last few lines of a fileTail This example displays the last 20 lines of file log.txt Default is Tcpoutconn Telnet This example changes the telnet port to port Uploads a file to the Tftp server TftpDownloads a file from the Tftp server Defines the IP address of the Tftp server to which the file Source file Defines the name of the source file after it has beenFile name is specified, the file will have the same name as Special characters Tftpboot 113 Timezone 115 Defines the file for which you want to view the contents TypeDisplays text from the file one page at a time Update Defines the source file to copy Uptime Useradd Profilename Permission Destination at login. The destination is specified when Specifies a user who can login into AI232 and accessRetrieve status or to change the configuration Permission is assigned Userdel Users Who Xon-interval Is 1 to 120 seconds AI232 Crash Codes This appendix provides information about AI232 crash codes Error Code Description Hexadecimal Decimal Crash CodesCommon Crash Codes AI232 Crash Codes System Failure Crash Reports Kentrox Technical Support AI232 Version 9.6x User’s Guide Standalone Mode and Switch Mode At the FTP prompt, open AI232 Standalone ModeDownloading Software for a Standalone AI232 Transfer the software image to AI232 Configuring BOOTP/TFTP At the FTP prompt, open AI198 Switch ModeDownloading Software for AI232 in Switch Mode Transfer the software image to AI198 Winslc baseport update AI232 Version 9.6x User’s Guide Commands for AI232 TACACS+ Server Enhancements AI232 Commands Following keyword lets users access destinations AI232 Menu Aliases Menu Menulink Following AI232 keywords apply to FTP access Provides FTP read accessFTP Sessions Acronym Meaning Command Line Interface Command and Control InterfaceChallenge-Handshake Authentication Protocol Border Gateway Protocol Domain Name Service Channel Service UnitDynamic Host Configuration Protocol Digital Service Unit Electrostatic Discharge File Transfer, Access, and ManagementEnd System End System to Intermediate System Link Access Protocol Balanced Integrated Services Digital NetworkInternet Service Provider Link State Update Operations, Administration, Maintenance, and Provisioning Nonservice AffectingNetwork Service Access Point Multimode Fiber Optic Cable Plain Old Telephone Service Password Authentication ProtocolPrivate ID or password QoS Quality of Service Service Advertisement Protocol Remote Network Monitoring SpecificationSerial Alarm Module Switching Center Control System TID Address Resolution Protocol Switched Virtual ConnectionTerminal Access Controller Access System Time Division Multiple Access Unshielded Twisted Pair XML Key Management SpecificationXerox Network Services Virtual Channel