AI232 Version 9.6x User’s Guide
AI232 Commands: Commands Overview
8-4
Using winslc Commands
To use winslc commands, the user must be logged into AI198 to receive output from
AI232. AI198 relays the command to AI232, which processes the command and
sends the result to the system log port (as configured in AI198 Menu 1.1). Valid winslc
commands are:
From the AI198, you can view the available winslc commands by entering the
following command:
winslc
baseport
help
where
baseport
specifies the baseport number of AI232.
Log/Alarm Message Header
To obtain output from winslc commands, enable the activity/alarm log (AI198 Menu
1.1, menu item 01*The activity and alarm log is turned). The first line of the response
for most winslc commands shows the following standard log/alarm message header:
Table 8-1 describes the Log/Alarm message header elements.
zarp zpvclist
zbreak zrouter
zcreset zshow
zdiag-tconn zstaeia
zhelp zstaslc
zip ztcpoutconn
zlink ztelnet
zpanic zupdate
zping zxon-interval
>@AI19807:42:26 081104 Sev=F Base=016 Msg:
Table 8-1 Log/Alarm Message Header Elements
Header Element Description
@AI198 Specifies the node name for the device that is producing the
log/alarm message (in this case, AI198).
7:42:26 Specifies the current time.