AI232 Version 9.6x User’s Guide

TID Multiplexing: TID Multiplexing Configuration

TID Multiplexing Configuration

Establish TID multiplexing by configuring aliases for calls that will go through AI232. Configure a parent alias to accept the incoming call from the OSS. After doing this, configure children aliases to route calls to the various network elements. For more information about aliases, refer to Chapter 7: Alias and Call Routing Configuration.

Configuring the Parent Alias



Note: AI recommends that you do not use connect-on-activity PVCs to establish a parent connection.

Configuration in the AI198 Menu System

1.Log in to AI198.

2.At the prompt, enter menu to access the Main Menu.

3.For 08+Configure the alias translation table, enter 8. The alias configuration

menu appears.

>8

Menu 8 01 Alias name -****************************************************************

02+Simple alias translation 03 Destination -

04 Called address -

05 This alias is visible in the destination menu-----------------------------NO

06 Link number is (1..16) -

07 Caller's address -

08 Call data -

09 App. string -

10 Called protocol -

11 Caller's protocol -

12 Alternate routing alias -

14+Test macros

15 Show entire alias

16 Show the first entry in the alias translation table

17 Show the previous entry in the alias translation table 18 Show the next entry in the alias translation table 19+Delete the above alias translation entry

20 Save the changes made (20b: to the beginning, 20e: to the end) 21 Exit this menu with no changes

Enter item number and optional ",value" then push <CR> key

>

4. For 01 Alias name, enter the alias name for the call coming from the OSS.

6-4

Page 132
Image 132
Kentrox AI232 manual TID Multiplexing Configuration, Configuring the Parent Alias, Menu appears