Kentrox AI232 manual Tftpboot, Command Type

AI232 Version 9.6x User’s Guide

AI232 Commands: tftpboot

tftpboot

Description

This command displays the BOOTP/TFTP status or aborts attempts to contact the BOOTP server. The AI232 card attempts to contact a BOOTP server if certain conditions are met. These conditions are:

zThe card is in standalone mode.

AND

zThe card does not have an IP address set or no BOOT.INI file exists.

Attempts to contact the BOOTP server continue until a valid reply is received or until the IP address gets set by the user in another manner, such as with an “ip init” shell command.



Note: If the conditions are initially met, then the card will not attempt to contact the BOOTP server.

When AI232 receives the necessary information from the BOOTP server, it attempts to retrieve a configuration file from the TFTP server. The TFTP server information is contained in the response from the BOOTP server.

Command Type

shell

Formats

tftpboot

Examples

This example displays the result of a card booting without a BOOTP/TFTP session.

[232]tftpboot

Usage: tftpboot [abort]

Displays BOOTP/TFTP status or aborts retry attempts.

BOOTP/TFTP did not run this session. [232]

8-112